how to replace shoe soles

Best answer


Press into the center of the sole with your thumb. If the sole feels spongy or weak, it is time to replace it. If you see a circular wearing pattern on the bottom of the shoe.

People also ask


  • How to repair shoe sole?

  • Shoe Sole Repair Steps 1. Clean the Repair Area 2. Preparation 3. The Glue 4. Apply the Glue to the Sole 5. Clamping the Shoe 6. Glue the Toe Cap 7. Trimming the Squeeze-Out 8. Sneaker Repair is Complete! Conclusion

  • How do you glue shoe soles together?

  • Clamping the Shoe Let the glue cure for about 2 minutes before mating the surfaces. After 2 minutes you can places some weights on the shoes to hold the sole and the upper together. I used brick pavers as my weights. Put the heel of the sneaker on a block of wood as shown.

  • How do you remove the sole of a sneaker?

  • Pull the sole away from the upper portion the sneaker, using the back end of a knife to pry the sole loose. As you pull, cut away excess glue with the back end of the knife. Since glue dries quickly, you may need to stop and apply more heat to the sole with the glue gun.

  • How do you know when it鈥檚 time to replace your shoes?

  • Press into the center of the sole with your thumb. If the sole feels spongy or weak, it is time to replace it. If you see a circular wearing pattern on the bottom of the shoe. If you look at the edge of the shoe where the sole meets the welt and see uneven wearing due to pronation, then it, again, is time to replace the sole.

    Leave a Reply