how to put together peloton shoes

Best answer


To install the Peloton Cycling Shoes, you鈥檒l need to follow these steps: 1)Adjust the Velcro straps by pulling them off their Velcro sides but into their secure rectangular holes. The Velcro side is the better side of your shoe because it will hold your shoe tight against your foot.

People also ask


  • Can you use SPD cleats on peloton shoes?

  • No, you cannot. SPD cleats are used in 2-hole cleat surfaces, while peloton shoes have three-hole cleat surfaces. The peloton shoes only use two types of cleat systems, which are SPD-SL and Look-Delta. The peloton brand shoes come with Look Delta cleats.

  • Can you walk in peloton shoes?

  • Well, unfortunately, you cannot walk in the peloton shoes since the cleat area is protruding. Besides, the outsole is rigid for optimal power transfer, hence tricky and even unsafe to step in. Therefore, you have to wear the shoes while sitting close to the bike to hop on the bike as soon as you are done.

  • How do you put cleats on a pair of shoes?

  • Removing the shoe, extend the line to the sole of the shoe. Using this line, bring in your shoe cleats and match them. You will find a line on the cleats, which you should match to your own. Set the cleats, at first loosely for each bolt. Then tighten the bolts, until you feel you can be safe in them.

  • How to wear soccer cleats correctly?

  • First off, wear your shoes, one at a time. Trace the ball of your foot, and mark it with colored ink, since it will guide the location of the cleats. Removing the shoe, extend the line to the sole of the shoe. Using this line, bring in your shoe cleats and match them. You will find a line on the cleats, which you should match to your own.

    Leave a Reply